Вземи желания продукт сега, избери подходяща за теб схема на изплащане:
Не е нужно да избираш, може да имаш всичко!
Купи на равни вноски стоки от 100 до 30000 лв., избери най-подходящата за теб вноска.
С TBI Pay, пазаруването е лесно, гъвкаво и напълно онлайн.
Контролът е в твоите ръце, не чакай.
Пазарувай!
The H5 series outdoor fan coils (with air return from below) have a stylish and clean design that fits into any room. The H5 fan coils achieve high efficiency and low noise levels thanks to the brushless DC motors. H5 models can be installed on the floor or on the ceiling, depending on customer preferences or installation needs.
The inverter fan coil units come with an option of 3 fan speeds to meet all your needs. The remote control KJR-75A allows the use of 7 levels of the fan, including a quiet night mode.
In case of a sudden power failure during operation, the unit restarts automatically and after the restart, it will continue to work with the previous setting (operation mode, temperature setting and fan speed).
Fan coil units can be connected to Midea central controllers via the custom XYE port. A Modbus interface is also supported via the custom PQE port with Modbus RTU protocol.
Installation and maintenance are made as easy as possible. Maintenance of convectors is quite easy and key components can be accessed by opening a cover.
| Model | MKH5-500 | ||
|---|---|---|---|
| Power supply | V/Ph/Hz | 220-240 / 1 / 50 | |
| Air flow (H/M/L) | m3/h | 850 / 720 / 640 | |
| CFM | 500 / 420 / 375 | ||
| Cooling1 | Capacity (H/M/L) | kW | 4.85/4.41/3.72 |
| Water flow rate (H/M/L) | m3/h | 834 | |
| Water pressure drop | kPa | 20 | |
| Heating2 | Capacity (H/M/L) | kW | 6.98 / 6.28 / 5.23 |
| Water pressure drop (H/M/L) | kPa | 17.4 | |
| Power input (H/M/L) | W | 49 / 39 / 34 | |
| Sound pressure level (H/M/L) | H3 (В/С/Н) | dB(A) | 41 / 38 / 36 |
| H4 (В/С/Н) | dB(A) | 43 / 40 / 38 | |
| H5 (В/С/Н) | dB(A) | 41 / 38 / 36 | |
| Fan motor | Type | Low noise 3-speed fan motor | |
| Quantity | 1 | ||
| Fan | Type | Centrifugal, forward-curved Blades | |
| Quantity | 2 | ||
| Coil | Row | 3 | |
| Max. working pressure | MPa | 1.6 | |
| Diameter | mm | φ9.52 | |
| Panel | Net dimensions (W х H х D) | mm | 950 × 545 × 212 |
| Packing size (W х H х D) | mm | 1039 × 639 × 305 | |
| Net weight | kg | 25 | |
| Gross weight | kg | 29 | |
| Body | Net dimensions (W х H х D) | mm | 1200 × 592 × 225 |
| Packing size (W х H х D) | mm | 1289 × 683 × 312 | |
| Net weight | kg | 32.5 / 32.5 | |
| Gross weight | kg | 38 / 38 | |
| Pipe connections | Water inlet/outlet pipe | inch | G3/4 |
| Drain pipe | mm | ODφ16 | |
Notes:
H: High fan speed; M: Medium fan speed; L: Low fan speed.
| Manufacturer | Midea |
| Type | Fan Coil |
| Indoor Unit | MKH5-500 |
| Power supply (V/ø/Hz) | 230 / 1 / 50 |
| Cooling Capacity (kW) | 4.85 |
| Heating Capacity (kW) | 6.98 |
| Power Input Cooling/Heating (kW) | 0.049 / 0.049 |
| Dimensions - Indoor Unit WxHxD (mm) | 1200 x 592 x 225 |
| Weight - Indoor Unit (kg) | 32.5 |
